REAR BLOCK

Simple lifting with the addition of a block.

This is a block part that can be added between the leaf and the hosing to provide lift.

The angle is precisely calculated to reduce the load on the propshaft when lifting, and the block itself corrects the caster angle.

Since the leaf can be lifted by this block without modifying the leaf, no structural modification procedures (under the Japanese legal system) are required.

*Depending on the vehicle model, installing our height adjustment parts to change the vehicle height may require changes to the settings of the vehicle's cameras, sensors, and radar systems. If not adjusted properly, various safety features (such as collision avoidance and other driver assistance systems) may not function correctly. In addition, please note that this may violate local laws regarding visibility while driving.
*Our company cannot be held responsible for any misrecognition by cameras, sensors, radars, etc. due to the installation of our parts, malfunction of driver assistance systems, or accidents caused by such malfunctions. Please note this in advance.
*Depending on the vehicle model, lifting the vehicle may cause it to fail to meet local standards for visibility. Please take measures in accordance with local laws.
*Depending on the vehicle model, lifting the vehicle may cause it to fail to meet safety standards for anti-wrap devices and anti-collision devices. It may be necessary to install new parts or readjust the mounting position of the anti-collision device to ensure that the height of the device is within the appropriate range.
*Depending on the vehicle model, the height of the lights may exceed regional legal limits due to simultaneous installation with other parts or an increase in tire diameter. Please take measures to ensure compliance with the law before use.
*Depending on the amount of change in vehicle height due to the installation of blocks, it may be necessary to apply for approval in accordance with local laws.